CF 12P

INTRODUCTORY PARAGRAPH

Key Features and Benefits Quick Summary

Huge Performance, Small Package: with up to 5 times the filter area of similar bag collectors, the CF 12PW with top-mounted fan occupies less than one square metre of floor space while offering the capacity and performance of a much larger dust extractor.

Negative Pressure Collector: no dust spewing out onto your shop floor.

Clean Air Fan: protects the fan from abrasive/ impact damage and reduces energy costs.

Continuous, On-line Reverse Pulse Filter Cleaning: Micronair’s unique reverse-pulse filter cleaning system utilises proprietary technology that minimises compressed air consumption and maximises the ‘pulse’ cleaning action – in less than a second!

Fast, Ergonomic Dust Disposal: “Quick-lock” bin system eliminates lifting, spillage and alignment issues.

Designed and Made in Australia: engineered to perform and built to last!

 

Technical Data:

Construction:­­

  • Powder-coated, laser cut, 3mm thick galvanized steel sheet carcass
  • Fully welded, hot-dipped galvanized steel legs, from 5mm angle iron
  • Fully sealed and assembled using stainless steel fittings

Filters:­­

  • 12 washable, spun-bond polyester cartridge filters.
  • Ø 120mm x 1100mm long, with 99.5% filtration efficiency at 1 micron. Total filter surface area = 24 m2
  • 10mm separation between pleats for optimal dust release during cleaning cycle.
  • PTFE filter coating available

Filter Chamber:

  • Dirty air enters below the filters into an open drop-out void in the filter chamber, where the heavier waste drops into the collection bin. The finer dust travels around the filter chamber in a cyclonic motion, accelerating the dropout of more particles. The remaining fine particles spiral over the outside of the filters – as the air is drawn through the filters, the dust is captured and the clean air is drawn up into the clean-air plenum.
  • The filter chamber is negatively pressurised ensuring that dust sealing is 100%. You could drill a hole into the extractor and no dust would be expelled into the work environment.

Inlet:    

  • Galvanised steel “pelican” inlet, slows the air as it enters the filter chamber maximising drop-out into the bin(s).
  • Standard dimensions (mm): 760×125, with Ø 250 connection (other inlet sizes, types available on request)
  • Location: filter chamber, left front or right rear side of chamber

Wheelie Bin:

  • Heavy duty, high impact, 240 litre capacity, with 14 kg total mass minimum
  • Quick-lock lever release and replace system
  • Bins can be used with or without bin liners

Compressed air requirements/ consumption:

  • 80 to 100 psi
  • 3 l/m, 0.40 CFM, 0.678 m3/hr

Standard Fans used with this Collector:

Medium Pressure                 High Pressure               

9-19 4.5A 4 kW                     9-19 5A 7.5 kW               9-19 5.6A 11 kW

6-35-4.5A-KT 5.5 kW              9-26 4.5A 11 kW