VC 12s

INTRODUCTORY PARAGRAPH

Key Features and Benefits Quick Summary

Big Performance, Small Package: the VC 12s with top-mounted fan occupies less than three square metres of floor space while offering the capacity and performance of a much larger dust extractor.

Negative Pressure Collector: no dust spewing out onto your shop floor.

Clean Air Fan: protects the fan from abrasive/ impact damage and reduces energy costs.

Automatic Filter Cleaning: its powerful shaker motor and frame clean all the filters after every use.

Fast, Ergonomic Dust Disposal: “Quick-lock” bin system eliminates lifting, spillage and alignment issues. 3 x 240 litre bins.

Designed and Made in Australia: engineered to perform and built to last!

 

Technical Data:

Construction:­­

  • Powder-coated, laser cut, 3mm thick galvanized steel sheet carcass
  • Fully welded, hot-dipped galvanized steel legs, from 5mm angle iron. One adjustable leg, 250mm range of adjustment
  • Fully sealed and assembled using stainless steel fittings

Filters:­­

  • 12 washable, spun-bond polyester cartridge filters, encased in rugged perforated metal cylinders to ensure effective vibration transfer to the entire filter and to protect the filter from impact damage.
  • 323mm Ø x 850mm long, with 99.5% filtration efficiency at 1 micron. Total filter surface area = 102 m2
  • 10mm separation between pleats for optimal dust release during cleaning cycle.
  • PTFE coated filters, other specialty filters also available

Filter Chamber:

  • Dirty air enters below the filters into a pre-separation dirty air plenum that separates heavier waste from fine dust. The heavier waste drops into collection bins. The fine dust spirals over the filters and clean air is drawn through into the fan.
  • The filter chamber is negatively pressurised to ensure air is drawn in (as opposed to being blown-in when the chamber is under pressure). The negatively pressurised filter chamber ensures that dust sealing is 100%. You could drill a hole in the VC 12s, and a bit more air would be drawn into the unit, no dust will be expelled into the work environment.

Inlets:  

  • Integrated Galvanised steel spigot,
  • Standard diameter (mm): 2 x 400 nominal (other inlet sizes, types available on request)
  • Location: dirty air plenum, left, or right side of plenum, rear side as an optional extra

Wheelie Bin:

  • 3 Heavy duty, high impact, 240 litre capacity, with 14 kg total mass minimum
  • Quick-lock lever release and replace system
  • Bins can be used with or without bin liners

Shaker motor specifications:

  • Electrical requirements: 3 phase, 415 V, 0.03 kW, maximum 0.17 amps
  • Cleaning cycle duration range: 30 to 180 seconds
  • Cleaning cycle delay settings: 0 to 30 hours, Default setting: 2 minutes