CF 42PF

INTRODUCTORY PARAGRAPH

Key Features and Benefits Quick Summary

Big Performance, Small Package: the VC4W with top-mounted fan occupies less than one square metre of floor space while offering the capacity and performance of a much larger dust extractor.

Negative Pressure Collector: no dust spewing out onto your shop floor.

Clean Air Fan: protects the fan from abrasive/ impact damage and reduces energy costs.

Automatic Filter Cleaning: its powerful shaker motor and frame clean all the filters after every use.

Fast, Ergonomic Dust Disposal: “Quick-lock” bin system eliminates lifting, spillage and alignment issues.

Designed and Made in Australia: engineered to perform and built to last!

 

Technical Data:

Construction:­­

  • Powder-coated, laser cut, 3mm thick galvanized steel sheet carcass
  • Fully welded, hot-dipped galvanized steel legs, from 5mm angle iron
  • One adjustable leg for ease of leveling, 250mm range of adjustment
  • Fully sealed and assembled using stainless steel fittings

Filters:­­

  • 4 washable, spun-bond polyester pleated filters, encased in rugged perforated metal cylinders to ensure effective vibration transfer to the entire filter and to protect the filter from impact damage.
  • 323mm Ø x 1700mm long, with 99.5% filtration efficiency at 1 micron. Total filter surface area = 68 m2
  • 10mm separation between pleats for optimal dust release during cleaning cycle.
  • PTFE filters also available

Filter Chamber:

  • Dirty air enters below the filters into a pre-separation dirty air plenum that separates heavier waste from fine dust. The heavier waste drops into collection bins. The fine dust spirals over the filters.
  • The filter chamber is negatively pressurised to ensure air is drawn in (as opposed to being blown-in when the chamber is under pressure). The negatively pressurised filter chamber ensures that dust sealing is 100%. Should a void in the seal occur, air will be drawn from the atmosphere into the unit, no dust will be expelled into the work environment.

Inlet:

  • Integrated Galvanised steel spigot,
  • Standard diameter (mm): 400 nominal (other inlet sizes, types available on request)
  • Location: dirty air plenum, left, or right side of plenum, rear side as an optional extra

Wheelie Bin:

  • Heavy duty, high impact, 240 litre capacity, with 14 kg total mass minimum
  • Quick-lock lever release and replace system
  • Bins can be used with or without bin liners

Shaker motor specifications:

  • Electrical requirements: 3 phase, 415 V, 0.03 kW, maximum 0.17 amps
  • Cleaning cycle duration range: 30 to 180 seconds
  • Cleaning cycle delay settings: 0 to 30 hours, Default setting: 2 minutes